Browsing by Author "Guilak, Farshid"

Osteoarthritis (OA) is one of the leading causes of disability in the United States, afflicting over 27 million Americans and imposing an economic burden of more than $128 billion each year (1, 2). OA is characterized by progressive degeneration of articular cartilage together with sub-chondral bone remodeling and synovial joint inflammation. Currently, OA treatments are limited, and inadequate to restore the joint to its full functionality.

Over the years, progresses have been made to create biologic cartilage substitutes. However, the repair of degenerated cartilage remains challenging due to its complex architecture and limited capability to integrate with surrounding tissues. Hence, there exists a need to create not only functional chondral constructs, but functional osteochondral constructs, which could potentially enhance affixing properties of cartilage implants utilizing the underlying bone. Furthermore, the molecular mechanisms driving chondrogenesis are still not fully understood. Therefore, detailed transcriptomic profiling would bring forth the progression of not only genes, but gene entities and networks that orchestrate this process.

Bone-marrow derived mesenchymal stem cells (MSCs) are routinely utilized to create cartilage constructs in vitro for the study of chondrogenesis. In this work, we set out to examine the underlying mechanisms of these cells, as well as the intricate gene correlation networks over the time course of lineage development. We first asked the question of how transforming growth factors are determining MSC differentiation, and subsequently utilized genetic engineering to manipulate this pathway to create an osteochondral construct. Next, we performed high-throughput next-generation sequencing to profile the dynamics of MSC transcriptomes over the time course of chondrogenesis. Bioinformatics analyses of these big data have yielded a multitude of information: the chondrogenic functional module, the associated gene ontologies, and finally the elucidation of GRASLND and its crucial function in chondrogenesis. We extended our results with a detailed molecular characterization of GRASLND and its underlying mechanisms. We showed that GRASLND could enhance chondrogenesis, and thus proposed its therapeutic use in cartilage tissue engineering as well as in the treatment of OA.

Articular cartilage is the connective tissue that lines the ends of long bones in diarthrodial joints, providing a low-friction load-bearing surface that can withstand a lifetime of loading cycles under normal conditions. Despite these unique and advantageous properties, the tissue possesses a limited capacity for self-repair due to its lack of vasculature and innervation. Total joint replacement is a well-established treatment for degenerative joint disease; however, the materials used in these procedures have a limited lifespan in vivo and will likely fail over time, requiring additional - and increasingly complicated - revision surgeries. For younger or more active patients, this risk is unacceptable. Unfortunately, alternative surgical options are not currently available, leaving pain management as the only viable treatment. In seeking to discover a new therapeutic strategy, the goal of this dissertation was to develop a functional tissue-engineered cartilage construct that may be used to resurface an entire diseased or damaged joint.

A three-dimensional (3-D) woven textile structure, produced on a custom-built miniature weaving loom, was utilized as the basis for producing novel composite scaffolds and cartilage tissue constructs that exhibited initial properties similar to those of native articular cartilage. Using polyglycolic acid (PGA) fibers combined with chondrocyte-loaded agarose or fibrin hydrogels, scaffolds were engineered with anisotropic, inhomogeneous, viscoelastic, and nonlinear characteristics prior to cultivation. However, PGA-based constructs showed a rapid loss of mechanical functionality over a 28 day culture period suggesting that the inclusion of other, less degradable, biomaterial fibers could provide more stable properties.

Retaining the original 3-D architecture and fiber/hydrogel composite construction, poly (epsilon-caprolactone) (PCL)-based scaffolds demonstrated initial biomechanical properties similar to those of PGA-based scaffolds. Long-term culture of 3-D PCL/fibrin scaffolds seeded with human adipose-derived stem cells (ASCs) showed that scaffolds maintained their baseline properties as new, collagen-rich tissue accumulated within the constructs.

In an attempt to improve the bioactivity of the PCL scaffold and further induce chondrogenic differentiation of seeded ASCs, we produced a hybrid scaffold system by embedding the 3-D woven structure within a porous matrix derived from native cartilage. We then demonstrated how this multifunctional scaffold could be molded, seeded, and cultured in order to produce an anatomically accurate tissue construct with potential for resurfacing the femoral head of a hip.

In summary, these findings provide valuable insight into a new approach for the functional tissue engineering of articular cartilage. The results of this work will hopefully lead to the discovery of new strategies for the long-term treatment of cartilage pathology.

The ends of long bones that articulate with respect to one another are lined with a crucial connective tissue called articular cartilage. This tissue plays an essential biomechanical function in synovial joints, as it serves to both dissipate load and lubricate articulating surfaces. Osteoarthritis is a painful and debilitating disease that drives the deterioration of articular cartilage. Like many chronic diseases, pro-inflammatory cytokines feature prominently in the onset and progression of osteoarthritis. Because cartilage lacks physiologic features critical for regeneration and self-repair, the development of effective strategies to create functional cartilage tissue substitutes remains a priority for the fields of tissue engineering and regenerative medicine. The overall objectives of this dissertation are to (1) develop a bioactive scaffold capable of mediating cell differentiation and formation of extracellular matrix that recapitulates native cartilage tissue and (2) to produce stem cells specifically tailored at the scale of the genome with the ability to resist inflammatory cues that normally lead to degeneration and pain.

Engineered replacements for musculoskeletal tissues generally require extensive ex vivo manipulation of stem cells to achieve controlled differentiation and phenotypic stability. By immobilizing lentivirus driving the expression of transforming growth factor-β3 to a highly structured, three dimensionally woven tissue engineering scaffold, we developed a technique for producing cell-instructive scaffolds that control human mesenchymal stem cell differentiation and possess biomechanical properties approximating those of native tissues. This work represents an important advance, as it establishes a method for generating constructs capable of restoring biological and mechanical function that may circumvent the need for ex vivo conditioning of engineered tissue substitutes.

Any functional cartilage tissue substitute must tolerate the inflammation intrinsic to an arthritic joint. Recently emerging tools from synthetic biology and genome engineering facilitate an unprecedented ability to modify how cells respond to their microenvironments. We exploited these developments to engineer cells that can evade signaling of the pro-inflammatory cytokine interleukin-1 (IL-1). Our study provides proof-of-principle evidence that cartilage derived from such engineered stem cells are resistant to IL-1-mediated degradation.

Extending on this work, we developed a synthetic biology strategy to further customize stem cells to combat inflammatory cues. We commandeered the highly responsive endogenous locus of the chemokine (C-C motif) ligand 2 gene in pluripotent stem cells to impart self-regulated, feedback-controlled production of biologic therapy. We demonstrated that repurposing of degradative signaling pathways induced by IL-1 and tumor necrosis factor toward transient production of cytokine antagonists enabled engineered cartilage tissue to withstand the action of inflammatory cytokines and to serve as a cell-based, auto-regulated drug delivery system.

In this work, we combine principles from synthetic biology, gene therapy, and functional tissue engineering to develop methods for generating constructs with biomimetic molecular and mechanical features of articular cartilage while precisely defining how cells respond to dysfunction in the body’s finely-tuned inflammatory systems. Moreover, our strategy for customizing intrinsic cellular signaling pathways in therapeutic stem cell populations opens innovative possibilities for controlled drug delivery to native tissues, which may provide safer and more effective treatments applicable to a wide variety of chronic diseases and may transform the landscape of regenerative medicine.

The pathogenesis of osteoarthritis is mediated in part by inflammatory cytokines including interleukin-1 (IL-1), which promote degradation of articular cartilage and prevent human mesenchymal stem cell (hMSC) chondrogenesis. We combined gene therapy and functional tissue engineering to develop engineered cartilage with immunomodulatory properties that allow chondrogenesis in the presence of pathologic levels of IL-1 by inducing overexpression of IL-1 receptor antagonist (IL-1Ra) in hMSCs via scaffold-mediated lentiviral gene delivery. A doxycycline-inducible vector was used to transduce hMSCs in monolayer or within 3D woven PCL scaffolds to enable tunable IL-1Ra production. In the presence of IL-1, IL-1Ra-expressing engineered cartilage produced cartilage-specific extracellular matrix, while resisting IL-1-induced upregulation of matrix metalloproteinases and maintaining mechanical properties similar to native articular cartilage. The ability of functional engineered cartilage to deliver tunable anti-inflammatory cytokines to the joint may enhance the long-term success of therapies for cartilage injuries or osteoarthritis.

Following this, we modified this anti-inflammatory engineered cartilage to incorporate rabbit MSCs and evaluated this therapeutic strategy in a pilot study in vivo in rabbit osteochondral defects. Rabbits were fed a custom doxycycline diet to induce gene expression in engineered cartilage implanted in the joint. Serum and synovial fluid were collected and the levels of doxycycline and inflammatory mediators were measured. Rabbits were euthanized 3 weeks following surgery and tissues were harvested for analysis. We found that doxycycline levels in serum and synovial fluid were too low to induce strong overexpression of hIL-1Ra in the joint and hIL-1Ra was undetectable in synovial fluid via ELISA. Although hIL-1Ra expression in the first few days local to the site of injury may have had a beneficial effect, overall a higher doxycycline dose and more readily transduced cell population would improve application of this therapy.

In addition to the 3D woven PCL scaffold, cartilage-derived matrix scaffolds have recently emerged as a promising option for cartilage tissue engineering. Spatially-defined, biomaterial-mediated lentiviral gene delivery of tunable and inducible morphogenetic transgenes may enable guided differentiation of hMSCs into both cartilage and bone within CDM scaffolds, enhancing the ability of the CDM scaffold to provide chondrogenic cues to hMSCs. In addition to controlled production of anti-inflammatory proteins within the joint, in situ production of chondro- and osteo-inductive factors within tissue-engineered cartilage, bone, or osteochondral tissue may be highly advantageous as it could eliminate the need for extensive in vitro differentiation involving supplementation of culture media with exogenous growth factors. To this end, we have utilized controlled overexpression of transforming growth factor-beta 3 (TGF-β3), bone morphogenetic protein-2 (BMP-2) or a combination of both factors, to induce chondrogenesis, osteogenesis, or both, within CDM hemispheres. We found that TGF-β3 overexpression led to robust chondrogenesis in vitro and BMP-2 overexpression led to mineralization but not accumulation of type I collagen. We also showed the development of a single osteochondral construct by combining tissues overexpressing BMP-2 (hemisphere insert) and TGF-β3 (hollow hemisphere shell) and culturing them together in the same media. Chondrogenic ECM was localized in the TGF-β3-expressing portion and osteogenic ECM was localized in the BMP-2-expressing region. Tissue also formed in the interface between the two pieces, integrating them into a single construct.

Since CDM scaffolds can be enzymatically degraded just like native cartilage, we hypothesized that IL-1 may have an even larger influence on CDM than PCL tissue-engineered constructs. Additionally, anti-inflammatory engineered cartilage implanted in vivo will likely affect cartilage and the underlying bone. There is some evidence that osteogenesis may be enhanced by IL-1 treatment rather than inhibited. To investigate the effects of an inflammatory environment on osteogenesis and chondrogenesis within CDM hemispheres, we evaluated the ability of IL-1Ra-expressing or control constructs to undergo chondrogenesis and osteogenesis in the prescence of IL-1. We found that IL-1 prevented chondrogenesis in CDM hemispheres but did not did not produce discernable effects on osteogenesis in CDM hemispheres. IL-1Ra-expressing CDM hemispheres produced robust cartilage-like ECM and did not upregulate inflammatory mediators during chondrogenic culture in the presence of IL-1.

The differentiation of human induced pluripotent stem cells (hiPSCs) to prescribed cell fates enables the engineering of patient-specific tissue types, such as hyaline cartilage, for applications in regenerative medicine, disease modeling, and drug screening. In many cases, however, these differentiation approaches are poorly controlled and generate heterogeneous cell populations. In this dissertation, we demonstrate robust cartilaginous matrix production in multiple hiPSC lines using a robust and reproducible differentiation protocol. To purify chondroprogenitors produced by this protocol, we engineered a COL2A1-GFP knock-in reporter hiPSC line by CRISPR-Cas9 genome editing. Purified chondroprogenitors demonstrated an improved chondrogenic capacity compared to unselected populations, improved matrix homogeneity, and reduced variability between tissues. We next demonstrated the ability of the system to serve as a high-throughput system for arthritis disease modeling using cytokine stimuli. Finally, we used this platform to screen for transcription factors whose activation might be involved in chondrogenic lineage specification of hiPSCs. Taken together, these studies describe the generation of a high-throughput system for chondrogenesis and its application for screens and arthritis disease modeling. Future applications of this platform may be useful for identifying pathways regulating cartilage regeneration and novel therapeutics for arthritis.

Articular cartilage is a connective tissue that lines the surfaces of diarthrodial joints; and functions to support and distribute loads as wells as facilitate smooth joint articulation. Unfortunately, cartilage possesses a limited capacity to self-repair. Once damaged, cartilage continues to degenerate until widespread cartilage loss results in the debilitating and painful disease of osteoarthritis. Current treatment options are limited to palliative interventions that seek to mitigate pain, and fail to recapitulate the native function. Cartilage tissue engineering offers a novel treatment option for the repair of focal defects as well as the complete resurfacing of osteoarthritic joints. Tissue engineering combines cells, growth factors, and biomaterials in order to synthesize new cartilage tissue that recapitulates the native structure, mechanical properties, and function of the native tissue. In this endeavor, there has been a growing interest in the use of scaffolds derived from the native extracellular matrix of cartilage. These cartilage-derived matrix (CDM) scaffolds have been show to recapitulate the native epitopes for cell-matrix interactions as well as provide entrapped growth factors; and have been shown to stimulate chondrogenic differentiation of a variety of cell types. Despite the potent chondroinductive properties of CDM scaffolds, they possess very weak mechanical properties that are several orders of magnitude lower than the native tissue. These poor mechanical properties lead to CDM scaffolds succumbing to cell-mediated contraction, which dramatically and unpredictably alters the size and shape of CDM constructs. Cell-mediated contraction not only prevents the fabrication of CDM constructs with specific, pre-determined dimensions, but also limits cellular proliferation and metabolic synthesis of cartilage proteins. This dissertation utilized collagen crosslinking techniques as well as ice-templating in order to enhance the mechanical properties of CDM scaffolds and prevent cell-mediated contraction. Furthermore, the decellularization of CDM was investigated in order to remove possible sources of immunogenicity. This work found that both physical and chemical crosslinking techniques were capable of preventing cell-mediated contraction in CDM scaffolds; however, the crosslinking techniques produced distinct effects on the chondroinductive capacity of CDM. Furthermore, the mechanical properties of CDM scaffolds were able to be enhanced by increasing the CDM concentration; however, this led to a concomitant decrease in pore size, which limited cellular infiltration. The pore size was able to be rescued through the use of an ice-templating technique that led to the formation of large aligned grooves, which enabled cellular infiltration. Additionally, a decellularization protocol was developed that successfully removed foreign DNA to the same order of magnitude as clinically approved materials, while preserving the native GAG content of the CDM, which has been shown to be critical in preserving the mechanical properties of the CDM. Altogether, this body of work demonstrated that dehydrothermal crosslinking was best suited for maintaining the chondroinductive capacity of the CDM, and given the appropriate scaffold fabrication parameters, such as CDM concentration and ice-templating technique, dehydrothermal treatment was able to confer mechanical properties that prevented cell-mediated contraction. To emphasize this finding, this work culminated in the fabrication of an anatomically-relevant hemispherical scaffold entirely from CDM alone. The CDM hemispheres not only supported chondrogenic differentiation, but also retained the original scaffold dimensions and shape throughout chondrogenic culture. These findings illustrate that CDM is a promising material for the fabrication of tailor-made scaffolds for cartilage tissue engineering.

The aim of this dissertation was to develop new techniques for producing electrospun scaffolds for use in the tissue engineering of articular cartilage. We developed a novel method of imparting mechanical anisotropy to electrospun scaffolds that allowed the production of a single, cohesive scaffold with varying directions of anisotropy in different layers by employing insulating masks to control the electric field. We improved the quantification of fiber alignment, discovering that surface fibers in isotropic scaffolds show similar amounts of fiber alignment as some types of anisotropic scaffolds, and that cells align themselves in response to this subtle fiber alignment. We improved previous methods to improve cellular infiltration into tissue engineering scaffolds. Finally, we produced a new material with chondrogenic potential consisting of native unpurified cartilage which was electrospun as a composite with a synthetic polymer. This work provided advances in three major areas of tissue engineering: scaffold properties, cell-scaffold interaction, and novel materials.

Articular cartilage is the thin, load-bearing connective tissue that lines the ends of long bones in diarthroidal joints, providing predominantly a mechanical function. Because cartilage is avascular and aneural, it has little capacity for self-repair if damaged. One repair strategy is through a functional tissue engineering approach using adipose-derived stem cells (ASCs). ASCs are an abundant progenitor cell source easily obtained through a minimally invasive liposuction procedure. When appropriately stimulated, ASCs have demonstrated significant potential for chondrogenic differentiation. Though studies have demonstrated the ability of ASCs to synthesize cartilage-specific macromolecules, a more thorough understanding of factors that modulate ASC chondrogenesis is required. Accordingly, the central aim of this dissertation was to study the chondrogenic response of ASCs to biochemical, biomechanical, and biomaterial factors.

We hypothesized that factors, other than TGF-beta and dexamethasone, would improve ASC chondrogenesis. BMP-6 emerged as a potent regulator of ASC chondrogenesis, particularly in early culture, as noted by significant upregulation of cartilage-specific extracellular matrix (ECM) genes and downregulation of cartilage hypertrophy markers.

Hypothesizing that biomechanical factors would accelerate the formation of cartilage-specific macromolecules, we designed and manufactured an instrument to apply dynamic deformational loading to ASC seeded constructs. Dynamic loading significantly inhibited ASC metabolism and downregulated cartilage-specific ECM genes. However, 21 days of dynamic loading induced the production of type II collagen, a principal component of articular cartilage.

We hypothesized that a biomaterial derived from cartilage would serve as a bioactive scaffold and induce chondrogenic differentiation. The novel, ECM-derived scaffold promoted the most robust differentiation of ASCs relative to both biochemical and biomechanical factors, particularly noted by a type II collagen-rich matrix after 28 days of culture. After 42 days of culture, biphasic mechanical testing revealed an aggregate modulus of 150 kPa, approaching that of native cartilage. These data suggest that the ECM-derived scaffold may retain important signaling molecules to drive differentiation or that ASC differentiation is dependent on proper cell anchorage.

In summary, we have shown that biochemical, biomechanical, and biomaterial factors have strong influences on the chondrogenic potential of ASCs. Optimization of these factors will ultimately be required to successfully engineer a functional tissue.