Browsing by Author "Morse, Paul E"

Now showing 1 - 5 of 5
  • Thumbnail Image
    ItemOpen Access
    Dental sculpting and compensatory shearing crests demonstrated in a WEAR series of Presbytis rubicunda (Cercopithecoidea, Colobidae) with dental topography analysis.
    (American journal of biological anthropology, 2024-09) Pampush, James D; Morse, Paul E; Kay, Richard F

    Objectives

    Maintaining effective and efficient occlusal morphology presents adaptive challenges for mammals, particularly because mastication produces interactions with foods and other materials that alters the geometry of occlusal surfaces through macrowear and/or catastrophic failure (i.e. "chipping"). Altered occlusal morphologies are often less effective for masticating materials of given diet-but not always-some species exhibit dental sculpting, meaning their dentitions are set up to harness macrowear to hone their occlusal surfaces into more effective morphologies (i.e. secondary morphologies). Here we show that dental sculpting is present in the folivorous Presbytis rubicunda of Borneo.

    Methods

    Thirty-one undamaged lower second molars of P. rubicunda exhibiting various stages of macroscopic wear were micro-CT scanned and processed into digital surfaces. The surfaces were measured for convex Dirichlet normal energy (vDNE, a measure of surface sharpness), and degree of surface wear. Regression analyses compared surface sharpness with several measures of wear to test for the presence and magnitude of dental sculpting.

    Results

    Positive correlations between the wear proxies and vDNE reveal that P. rubicunda wear in such a way as to become sharper, and therefore more effective chewing surfaces by exposing enamel-dentine junctions on their occlusal surfaces and then honing these junctions into sharpened edges. Compared to another primate folivore in which increasing surface sharpness with macrowear has been demonstrated (i.e., Alouatta palliata), the worn surfaces are similarly sharp, but the dental sculpting process appears to be different.

    Discussion

    The results presented here suggest that not only do some primates exhibit dental sculpting and the attendant secondary morphology, but that there appear to be multiple different morphological configurations that can achieve this result. P. rubicunda has thicker enamel and a more stereotyped wear pattern than A. palliata, although both show positive correlations of occlusal surface sharpness (vDNE) with various wear proxies. These findings shed light on the varied approaches for the maintenance of effective and efficient occlusal surfaces in primates.
  • Thumbnail Image
    ItemOpen Access
    Dental topographic change with macrowear and dietary inference in Homunculus patagonicus.
    (Journal of human evolution, 2020-07) Li, Peishu; Morse, Paul E; Kay, Richard F
    Homunculus patagonicus is a stem platyrrhine from the late Early Miocene, high-latitude Santa Cruz Formation, Argentina. Its distribution lies farther south than any extant platyrrhine species. Prior studies on the dietary specialization of Homunculus suggest either a mixed diet of fruit and leaves or a more predominantly fruit-eating diet. To gain further insight into the diet of Homunculus, we examined how the occlusal surfaces of the first and second lower molars of Homunculus change with wear by using three homology-free dental topographic measures: Dirichlet normal energy (DNE), orientation patch count rotated (OPCR), and relief index (RFI). We compared these data with wear series of three extant platyrrhine taxa: the folivorous Alouatta, and the frugivorous Ateles and Callicebus (titi monkeys now in the genus Plecturocebus). Previous studies found Alouatta and Ateles exhibit distinctive patterns of change in occlusal morphology with macrowear, possibly related to the more folivorous diet of the former. Based on previous suggestions that Homunculus was at least partially folivorous, we predicted that changes in dental topographic metrics with wear would follow a pattern more similar to that seen in Alouatta than in Ateles or Callicebus. However, wear-induced changes in Homunculus crown sharpness (DNE) and complexity (OPCR) are more similar to the pattern observed in the frugivorous Ateles and Callicebus. Based on similar wear modalities of the lower molars between Homunculus and Callicebus, we infer that Homunculus had a primarily frugivorous diet. Leaves may have provided an alternative dietary resource to accommodate fluctuation in seasonal fruiting abundance in the high-latitude extratropical environment of late Early Miocene Patagonia.
  • Thumbnail Image
    ItemOpen Access
    Dental topography of the Oligocene anthropoids Aegyptopithecus zeuxis and Apidium phiomense: Paleodietary insights from analysis of wear series.
    (Journal of human evolution, 2023-05) Morse, Paul E; Pampush, James D; Kay, Richard F
    Fossil primate dietary inference is enhanced when ascertained through multiple, distinct proxies. Dental topography can be used to assess changes in occlusal morphology with macrowear, providing insight on tooth use and function across the lifespans of individuals. We measured convex Dirichlet normal energy-a dental topography metric reflecting occlusal sharpness of features such as cusps and crests-in macrowear series of the second mandibular molars of two African anthropoid taxa from ∼30 Ma (Aegyptopithecus zeuxis and Apidium phiomense). Wear was quantified via three proxies: occlusal dentine exposure, inverse relief index, and inverse occlusal relief. The same measurements were calculated on macrowear series of four extant platyrrhine taxa (Alouatta, Ateles, Plecturocebus, and Sapajus apella) to provide an analogical framework for dietary inference in the fossil taxa. We predicted that Ae. zeuxis and Ap. phiomense would show similar patterns in topographic change with wear to one another and to extant platyrrhine frugivores like Ateles and Plecturocebus. The fossil taxa have similar distributions of convex Dirichlet normal energy to one another, and high amounts of concave Dirichlet normal energy 'noise' in unworn molars-a pattern shared with extant hominids that may distort dietary interpretations. Inverse relief index was the most useful wear proxy for comparison among the taxa in this study which possess disparate enamel thicknesses. Contrary to expectations, Ae. zeuxis and Ap. phiomense both resemble S. apella in exhibiting an initial decline in convex Dirichlet normal energy followed by an increase at the latest stages of wear as measured by inverse relief index, lending support to previous suggestions that hard-object feeding played a role in their dietary ecology. Based on these results and previous analyses of molar shearing quotients, microwear, and enamel microstructure, we suggest that Ae. zeuxis had a pitheciine-like strategy of seed predation, whereas Ap. phiomense potentially consumed berry-like compound fruits with hard seeds.
  • Thumbnail Image
    ItemOpen Access
    Smooth operator: The effects of different 3D mesh retriangulation protocols on the computation of Dirichlet normal energy.
    (American journal of physical anthropology, 2017-05) Spradley, Jackson P; Pampush, James D; Morse, Paul E; Kay, Richard F
    Dirichlet normal energy (DNE) is a metric of surface topography that has been used to evaluate the relationship between the surface complexity of primate cheek teeth and dietary categories. This study examines the effects of different 3D mesh retriangulation protocols on DNE. We examine how different protocols influence the DNE of a simple geometric shape-a hemisphere-to gain a more thorough understanding than can be achieved by investigating a complex biological surface such as a tooth crown.We calculate DNE on 3D surface meshes of hemispheres and on primate molars subjected to various retriangulation protocols, including smoothing algorithms, smoothing amounts, target face counts, and criteria for boundary face exclusion. Software used includes R, MorphoTester, Avizo, and MeshLab. DNE was calculated using the R package "molaR."In all cases, smoothing as performed in Avizo sharply decreases DNE initially, after which DNE becomes stable. Using a broader boundary exclusion criterion or performing additional smoothing (using "mesh fairing" methods) further decreases DNE. Increasing the mesh face count also results in increased DNE on tooth surfaces.Different retriangulation protocols yield different DNE values for the same surfaces, and should not be combined in meta-analyses. Increasing face count will capture surface microfeatures, but at the expense of computational speed. More aggressive smoothing is more likely to alter the essential geometry of the surface. A protocol is proposed that limits potential artifacts created during surface production while preserving pertinent features on the occlusal surface.
  • Thumbnail Image
    ItemOpen Access
    Wear and its effects on dental topography measures in howling monkeys (Alouatta palliata).
    (Am J Phys Anthropol, 2016-12) Pampush, James D; Spradley, Jackson P; Morse, Paul E; Harrington, Arianna R; Allen, Kari L; Boyer, Doug M; Kay, Richard F
    OBJECTIVES: Three dental topography measurements: Dirichlet Normal Energy (DNE), Relief Index (RFI), and Orientation Patch Count Rotated (OPCR) are examined for their interaction with measures of wear, within and between upper and lower molars in Alouatta palliata. Potential inferences of the "dental sculpting" phenomenon are explored. MATERIALS AND METHODS: Fifteen occluding pairs of howling monkey first molars (15 upper, 15 lower) opportunistically collected from La Pacifica, Costa Rica, were selected to sample wear stages ranging from unworn to heavily worn as measured by the Dentine Exposure Ratio (DER). DNE, RFI, and OPCR were measured from three-dimensional surface reconstructions (PLY files) derived from high-resolution CT scans. Relationships among the variables were tested with regression analyses. RESULTS: Upper molars have more cutting edges, exhibiting significantly higher DNE, but have significantly lower RFI values. However, the relationships among the measures are concordant across both sets of molars. DER and EDJL are curvilinearly related. DER is positively correlated with DNE, negatively correlated with RFI, and uncorrelated with OPCR. EDJL is not correlated with DNE, or RFI, but is positively correlated with OPCR among lower molars only. DISCUSSION: The relationships among these metrics suggest that howling monkey teeth adaptively engage macrowear. DNE increases with wear in this sample presumably improving food breakdown. RFI is initially high but declines with wear, suggesting that the initially high RFI safeguards against dental senescence. OPCR values in howling monkey teeth do not show a clear relationship with wear changes.