Browsing by Author "Osawa, Masaki"

Now showing 1 - 15 of 15
  • Thumbnail Image
    ItemOpen Access
    Cell division without FtsZ--a variety of redundant mechanisms.
    (Molecular microbiology, 2010-10) Erickson, Harold P; Osawa, Masaki
    Until 1998 it looked like all bacteria and archaea used a universal cytokinetic machine based on FtsZ. A dozen completely sequenced bacterial genomes all had an ftsZ gene, as did the several sequenced archaeal genomes. Then in 1998-1999 two species of Chlamydia were sequenced and found to have no ftsZ (Stephens et al., 1998; Kalman et al., 1999). Enthusiasts of FtsZ could hold out some hope for its primacy by thinking that these obligate parasites might use some host machinery for division. But the next year the genome of Aeropyrum pernix, a free living thermophilic archeon, was found to be without ftsZ (Kawarabayasi et al., 1999). Additional sequences suggested that the entire kingdom of Crenarchaea managed life and cell division without FtsZ. Among the bacteria the following are now known to have no ftsZ: the phylum Planctomycetes (Pilhofer et al., 2008), which is related to Chlamydiae but is free-living; Calyptogena okutanii (Kuwahara et al., 2007) and Carsonella ruddi (Nakabachi et al., 2006), both intracellular symbionts; Ureaplasma urealiticum (Glass et al., 2000) and Mycoplasma mobile (Jaffe et al., 2004). Since all of these prokaryotes divide, there must be mechanisms for cell division that are not based on FtsZ. © 2010 Blackwell Publishing Ltd.
  • Thumbnail Image
    ItemOpen Access
    Chapter 1 - Tubular liposomes with variable permeability for reconstitution of FtsZ rings.
    (Methods in enzymology, 2009-01) Osawa, Masaki; Erickson, Harold P
    We have developed a system for producing tubular multilamellar liposomes that incorporate the protein FtsZ on the inside. We start with a mixture of spherical multilamellar liposomes with FtsZ initially on the outside. Shearing forces generated by applying a coverslip most likely distort some of the spherical liposomes into a tubular shape, and causes some to leak and incorporate FtsZ inside. We describe protocols for liposome preparation, and for preparing membrane-targeted FtsZ that can assemble contractile Z rings inside the tubular liposomes. We also describe the characterization of the multilamellar liposomes in terms of the permeability or leakiness for a small fluorescent dye and larger protein molecules. These liposomes may be useful for reconstitution of other biological systems.
  • Thumbnail Image
    ItemOpen Access
    Curved FtsZ protofilaments generate bending forces on liposome membranes.
    (The EMBO journal, 2009-11) Osawa, Masaki; Anderson, David E; Erickson, Harold P
    We have created FtsZ-YFP-mts where an amphipathic helix on the C-terminus tethers FtsZ to the membrane. When incorporated inside multi-lamellar tubular liposomes, FtsZ-YFP-mts can assemble Z rings that generate a constriction force. When added to the outside of liposomes, FtsZ-YFP-mts bound and produced concave depressions, bending the membrane in the same direction as the Z ring inside liposomes. Prominent membrane tubules were then extruded at the intersections of concave depressions. We tested the effect of moving the membrane-targeting sequence (mts) from the C-terminus to the N-terminus, which is approximately 180 degrees from the C-terminal tether. When mts-FtsZ-YFP was applied to the outside of liposomes, it generated convex bulges, bending the membrane in the direction opposite to the concave depressions. We conclude that FtsZ protofilaments have a fixed direction of curvature, and the direction of membrane bending depends on which side of the bent protofilament the mts is attached to. This supports models in which the FtsZ constriction force is generated by protofilament bending.
  • Thumbnail Image
    ItemOpen Access
    FtsZ in bacterial cytokinesis: cytoskeleton and force generator all in one.
    (Microbiology and molecular biology reviews : MMBR, 2010-12) Erickson, Harold P; Anderson, David E; Osawa, Masaki
    FtsZ, a bacterial homolog of tubulin, is well established as forming the cytoskeletal framework for the cytokinetic ring. Recent work has shown that purified FtsZ, in the absence of any other division proteins, can assemble Z rings when incorporated inside tubular liposomes. Moreover, these artificial Z rings can generate a constriction force, demonstrating that FtsZ is its own force generator. Here we review light microscope observations of how Z rings assemble in bacteria. Assembly begins with long-pitch helices that condense into the Z ring. Once formed, the Z ring can transition to short-pitch helices that are suggestive of its structure. FtsZ assembles in vitro into short protofilaments that are ∼30 subunits long. We present models for how these protofilaments might be further assembled into the Z ring. We discuss recent experiments on assembly dynamics of FtsZ in vitro, with particular attention to how two regulatory proteins, SulA and MinC, inhibit assembly. Recent efforts to develop antibacterial drugs that target FtsZ are reviewed. Finally, we discuss evidence of how FtsZ generates a constriction force: by protofilament bending into a curved conformation.
  • Thumbnail Image
    ItemOpen Access
    FtsZ Protofilament Curvature Is the Opposite of Tubulin Rings.
    (Biochemistry, 2016-07) Housman, Max; Milam, Sara L; Moore, Desmond A; Osawa, Masaki; Erickson, Harold P
    FtsZ protofilaments (pfs) form the bacterial cytokinetic Z ring. Previous work suggested that a conformational change from straight to curved pfs generated the constriction force. In the simplest model, the C-terminal membrane tether is on the outside of the curved pf, facing the membrane. Tubulin, a homologue of FtsZ, also forms pfs with a curved conformation. However, it is well-established that tubulin rings have the C terminus on the inside of the ring. Could FtsZ and tubulin rings have the opposite curvature? In this study, we explored the FtsZ curvature direction by fusing large protein tags to the FtsZ termini. Thin section electron microscopy showed that the C-terminal tag was on the outside, consistent with the bending pf model. This has interesting implications for the evolution of tubulin. Tubulin likely began with the curvature of FtsZ, but evolution managed to reverse direction to produce outward-curving rings, which are useful for pulling chromosomes.
  • Thumbnail Image
    ItemOpen Access
    Inside-out Z rings--constriction with and without GTP hydrolysis.
    (Molecular microbiology, 2011-07) Osawa, Masaki; Erickson, Harold P
    The bacterial tubulin homologue FtsZ forms a ring-like structure called the Z ring that drives cytokinesis. We showed previously that FtsZ-YFP-mts, which has a short amphipathic helix (mts) on its C terminus that inserts into the membrane, can assemble contractile Z rings in tubular liposomes without any other protein. Here we study mts-FtsZ-YFP, where the membrane tether is switched to the opposite side of the protofilament. This assembled 'inside-out' Z rings that wrapped around the outside surface of tubular liposomes. The inside-out Z rings were highly dynamic, and generated a constriction force that squeezed the tubular liposomes from outside. This is consistent with models where the constriction force is generated by curved protofilaments bending the membrane. We used this system to test how GTP hydrolysis by FtsZ is involved in Z-ring constriction. Without GTP hydrolysis, Z rings could still assemble and generate an initial constriction. However, the constriction quickly stopped, suggesting that Z rings became rigidly stabilized in the absence of GTP hydrolysis. We propose that remodelling of the Z ring, mediated by GTP hydrolysis and exchange of subunits, is necessary for the continuous constriction.
  • Thumbnail Image
    ItemOpen Access
    L form bacteria growth in low-osmolality medium.
    (Microbiology (Reading, England), 2019-08) Osawa, Masaki; Erickson, Harold P
    L form bacteria do not have a cell wall and are thought to require medium of high osmolality for survival and growth. In this study we tested whether L forms can adapt to growth in lower osmolality medium. We first tested the Escherichia coli L form NC-7, generated in 1987 by Onoda following heavy mutagenesis. We started with growth in osmoprotective medium (~ 764 mOsm kg-1) and diluted it stepwise into medium of lower osmolality. At each step the cells were given up to 10 days to adapt and begin growing, during which they apparently acquired multiple new mutations. We eventually obtained a strain that could grow in LB containing only 34 mM NaCl, 137 mOsm kg-1 total. NC-7 showed a variety of morphologies including spherical, angular and cylindrical cells. Some cells extruded a bud that appeared to be the outer membrane enclosing an enlarged periplasm. Additional evidence for an outer membrane was sensitivity of the cells to the compound CHIR-090, which blocks the LPS pathway, and to EDTA which chelates Mg that may stabilize and rigidify the LPS in the outer membrane. We suggest that the mechanical rigidity of the outer membrane enables the angular shapes and provides some resistance to turgor in the low-osmolality media. Interestingly, cells that had an elongated shape underwent division shortly after addition of EDTA, suggesting that reducing the rigidity of the outer membrane under some turgor pressure induces division before lysis occurs. We then tested a well-characterized L form from Bacillus subtilis. L form strain LR-2L grew well with sucrose at 1246 and 791 mOsm kg-1. It survived when diluted directly into 440 mOsm kg-1 but grew poorly, achieving only 1/10 to 1/5 the density. The B. subtilis L form apparently adapted to this direct dilution by rapidly reducing cytoplasmic osmolality.
  • Thumbnail Image
    ItemOpen Access
    Liposome division by a simple bacterial division machinery.
    (Proceedings of the National Academy of Sciences of the United States of America, 2013-07) Osawa, Masaki; Erickson, Harold P
    We previously reconstituted Z rings in tubular multilamellar liposomes with FtsZ-YFP-mts, where mts is a membrane-targeting amphiphilic helix. These reconstituted Z rings generated a constriction force but did not divide the thick-walled liposomes. Here we developed a unique system to observe Z rings in unilamellar liposomes. FtsZ-YFP-mts incorporated inside large, unilamellar liposomes formed patches that produced concave distortions when viewed at the equator of the liposome. When viewed en face at the top of the liposome, many of the patches were seen to be small Z rings, which still maintained the concave depressions. We also succeeded in reconstituting the more natural, two-protein system, with FtsA and FtsZ-YFP (having the FtsA-binding peptide instead of the mts). Unilamellar liposomes incorporating FtsA and FtsZ-YFP showed a variety of distributions, including foci and linear arrays. A small fraction of liposomes had obvious Z rings. These Z rings could constrict the liposomes and in some cases appeared to complete the division, leaving a clear septum between the two daughter liposomes. Because complete liposome divisions were not seen with FtsZ-mts, FtsA may be critical for the final membrane scission event. We demonstrate that reconstituted cell division machinery apparently divides the liposome in vitro.
  • Thumbnail Image
    ItemOpen Access
    Negative-stain electron microscopy of inside-out FtsZ rings reconstituted on artificial membrane tubules show ribbons of protofilaments.
    (Biophysical journal, 2012-07) Milam, Sara L; Osawa, Masaki; Erickson, Harold P
    FtsZ, the primary cytoskeletal element of the Z ring, which constricts to divide bacteria, assembles into short, one-stranded filaments in vitro. These must be further assembled to make the Z ring in bacteria. Conventional electron microscopy (EM) has failed to image the Z ring or resolve its substructure. Here we describe a procedure that enabled us to image reconstructed, inside-out FtsZ rings by negative-stain EM, revealing the arrangement of filaments. We took advantage of a unique lipid that spontaneously forms 500 nm diameter tubules in solution. We optimized conditions for Z-ring assembly with fluorescence light microscopy and then prepared specimens for negative-stain EM. Reconstituted FtsZ rings, encircling the tubules, were clearly resolved. The rings appeared as ribbons of filaments packed side by side with virtually no space between neighboring filaments. The rings were separated by variable expanses of empty tubule as seen by light microscopy or EM. The width varied considerably from one ring to another, but each ring maintained a constant width around its circumference. The inside-out FtsZ rings moved back and forth along the tubules and exchanged subunits with solution, similarly to Z rings reconstituted outside or inside tubular liposomes. FtsZ from Escherichia coli and Mycobacterium tuberculosis assembled rings of similar structure, suggesting a universal structure across bacterial species. Previous models for the Z ring in bacteria have favored a structure of widely scattered filaments that are not in contact. The ribbon structure that we discovered here for reconstituted inside-out FtsZ rings provides what to our knowledge is new evidence that the Z ring in bacteria may involve lateral association of protofilaments.
  • Thumbnail Image
    ItemOpen Access
    Probing for Binding Regions of the FtsZ Protein Surface through Site-Directed Insertions: Discovery of Fully Functional FtsZ-Fluorescent Proteins.
    (J Bacteriol, 2017-01-01) Moore, Desmond A; Whatley, Zakiya N; Joshi, Chandra P; Osawa, Masaki; Erickson, Harold P
    FtsZ, a bacterial tubulin homologue, is a cytoskeletal protein that assembles into protofilaments that are one subunit thick. These protofilaments assemble further to form a "Z ring" at the center of prokaryotic cells. The Z ring generates a constriction force on the inner membrane and also serves as a scaffold to recruit cell wall remodeling proteins for complete cell division in vivo One model of the Z ring proposes that protofilaments associate via lateral bonds to form ribbons; however, lateral bonds are still only hypothetical. To explore potential lateral bonding sites, we probed the surface of Escherichia coli FtsZ by inserting either small peptides or whole fluorescent proteins (FPs). Among the four lateral surfaces on FtsZ protofilaments, we obtained inserts on the front and back surfaces that were functional for cell division. We concluded that these faces are not sites of essential interactions. Inserts at two sites, G124 and R174, located on the left and right surfaces, completely blocked function, and these sites were identified as possible sites for essential lateral interactions. However, the insert at R174 did not interfere with association of protofilaments into sheets and bundles in vitro Another goal was to find a location within FtsZ that supported insertion of FP reporter proteins while allowing the FtsZ-FPs to function as the sole source of FtsZ. We discovered one internal site, G55-Q56, where several different FPs could be inserted without impairing function. These FtsZ-FPs may provide advances for imaging Z-ring structure by superresolution techniques. IMPORTANCE: One model for the Z-ring structure proposes that protofilaments are assembled into ribbons by lateral bonds between FtsZ subunits. Our study excluded the involvement of the front and back faces of the protofilament in essential interactions in vivo but pointed to two potential lateral bond sites, on the right and left sides. We also identified an FtsZ loop where various fluorescent proteins could be inserted without blocking function; these FtsZ-FPs functioned as the sole source of FtsZ. This advance provides improved tools for all fluorescence imaging of the Z ring and may be especially important for superresolution imaging.
  • Thumbnail Image
    ItemOpen Access
    The cell division protein MinD from Pseudomonas aeruginosa dominates the assembly of the MinC-MinD copolymers.
    (The Journal of biological chemistry, 2018-04-02) Huang, Haiyan; Wang, Ping; Bian, Li; Osawa, Masaki; Erickson, Harold P; Chen, Yaodong
    Cell division of rod-shaped bacteria requires the Z ring, a ring of FtsZ filaments associated with the inner-membrane wall. The MinCDE proteins help localize the Z ring to the center of the Escherichia coli cell. MinC, which inhibits Z-ring assembly, is a passenger on MinD. Previous studies have shown that MinC-MinD from E. coli and Aquifex aeolicus assemble in vitro into extended filaments with a 1:1 stoichiometry. However, a recent study has raised questions about the function of the MinC-MinD copolymer in vivo, since its assembly appears to require a high concentration of these two proteins, has a long lag time, and its blockade does not affect in vivo activities. Here, we found that MinC and MinD from Pseudomonas aeruginosa coassemble into filaments with a 1:1 stoichiometry. We also found that the minimal concentration of ~4 μM required for assembly applies only to MinD because above 4 μM MinD, even very low MinC concentrations sustained coassembly. As previously reported, the MinC-MinD coassembly exhibited a long lag of ~100 s when initiated by ATP. Premixing MinD with ATP eliminated this lag, suggesting that it may be due to slow MinD dimerization following ATP activation. We also discovered that MinC-MinD copolymers quickly bound and formed huge bundles with FtsZ filaments. Our results resolve previous questions about the low concentration of MinC and the lag time, insights that may inform future investigations into the exact role of the MinC-MinD copolymer in vivo.
  • Thumbnail Image
    ItemOpen Access
    The Chloroplast Tubulin Homologs FtsZA and FtsZB from the Red Alga Galdieria sulphuraria Co-assemble into Dynamic Filaments.
    (J Biol Chem, 2017-02-07) Chen, Yaodong; Porter, Katie; Osawa, Masaki; Augustus, Anne Marie; Milam, Sara L; Joshi, Chandra; Osteryoung, Katherine W; Erickson, Harold P
    FtsZ is a homolog of eukaryotic tubulin and is present in almost all bacteria and many archaea, where it is the major cytoskeletal protein in the Z ring, required for cell division. Unlike some other cell organelles of prokaryotic origin, chloroplasts have retained FtsZ as an essential component of the division machinery. However, chloroplast FtsZs have been challenging to study because they are difficult to express and purify. To this end, we have used a FATT-tag expression system to produce as soluble proteins the two chloroplast FtsZs from Galdieria sulphuraria, a thermophilic red alga. GsFtsZA and GsFtsZB assembled individually in the presence of GTP, forming large bundles of protofilaments. GsFtsZA also assembled in the presence of GDP, the first member of the FtsZ/tubulin superfamily to do so. Mixtures of GsFtsZA and GsFtsZB assembled protofilament bundles and hydrolyzed GTP at a rate approximately equal to the sum of their individual rates, suggesting a random co-assembly. GsFtsZA assembly by itself in limiting GTP gave polymers that remained stable for a prolonged time. However, when GsFtsZB was added, the co-polymers disassembled with enhanced kinetics, suggesting that the GsFtsZB regulates and enhances disassembly dynamics. GsFtsZA-mts (where mts is a membrane-targeting amphipathic helix) formed Z ring-like helices when expressed in E. coli. Co-expression of GsFtsZB (without an mts) gave co-assembly of both into similar helices. In summary, we provide biochemical evidence that GsFtsZA assembles as the primary scaffold of the chloroplast Z ring, and that GsFtsZB co-assembly enhances polymer disassembly and dynamics.
  • Thumbnail Image
    ItemOpen Access
    Turgor Pressure and Possible Constriction Mechanisms in Bacterial Division.
    (Frontiers in microbiology, 2018-01-31) Osawa, Masaki; Erickson, Harold P
    Bacterial cytokinesis begins with the assembly of FtsZ into a Z ring at the center of the cell. The Z-ring constriction in Gram-negative bacteria may occur in an environment where the periplasm and the cytoplasm are isoosmotic, but in Gram-positive bacteria the constriction may have to overcome a substantial turgor pressure. We address three potential sources of invagination force. (1) FtsZ itself may generate force by curved protofilaments bending the attached membrane. This is sufficient to constrict liposomes in vitro. However, this force is on the order of a few pN, and would not be enough to overcome turgor. (2) Cell wall (CW) synthesis may generate force by pushing the plasma membrane from the outside. However, this would probably require some kind of Brownian ratchet to separate the CW and membrane sufficiently to allow a glycan strand to slip in. The elastic element is not obvious. (3) Excess membrane production has the potential to contribute significantly to the invagination force. If the excess membrane is produced under the CW, it would force the membrane to bleb inward. We propose here that a combination of FtsZ pulling from the inside, and excess membrane pushing membrane inward may generate a substantial constriction force at the division site. This combined force generation mechanism may be sufficient to overcome turgor pressure. This would abolish the need for a Brownian ratchet for CW growth, and would permit CW to operate by reinforcing the constrictions generated by FtsZ and excess membrane.
  • Thumbnail Image
    ItemOpen Access
    Whole genome re-sequencing to identify suppressor mutations of mutant and foreign Escherichia coli FtsZ.
    (PLoS One, 2017) Gardner, Kiani AJ Arkus; Osawa, Masaki; Erickson, Harold P
    FtsZ is an essential protein for bacterial cell division, where it forms the cytoskeletal scaffold and may generate the constriction force. We have found previously that some mutant and foreign FtsZ that do not complement an ftsZ null can function for cell division in E. coli upon acquisition of a suppressor mutation somewhere in the genome. We have now identified, via whole genome re-sequencing, single nucleotide polymorphisms in 11 different suppressor strains. Most of the mutations are in genes of various metabolic pathways, which may modulate cell division indirectly. Mutations in three genes, ispA, accD and nlpI, may be more directly involved in cell division. In addition to the genomic suppressor mutations, we identified intragenic suppressors of three FtsZ point mutants (R174A, E250K and L272V).
  • Thumbnail Image
    ItemOpen Access
    ZipA and FtsA* stabilize FtsZ-GDP miniring structures.
    (Sci Rep, 2017-06-16) Chen, Yaodong; Huang, Haiyan; Osawa, Masaki; Erickson, Harold P
    The cytokinetic division ring of Escherichia coli comprises filaments of FtsZ tethered to the membrane by FtsA and ZipA. Previous results suggested that ZipA is a Z-ring stabilizer, since in vitro experiments it is shown that ZipA enhanced FtsZ assembly and caused the filaments to bundles. However, this function of ZipA has been challenged by recent studies. First, ZipA-induced FtsZ bundling was not significant at pH greater than 7. Second, some FtsA mutants, such as FtsA* were able to bypass the need of ZipA. We reinvestigated the interaction of FtsZ with ZipA in vitro. We found that ZipA not only stabilized and bundled straight filaments of FtsZ-GTP, but also stabilized the highly curved filaments and miniring structures formed by FtsZ-GDP. FtsA* had a similar stabilization of FtsZ-GDP minirings. Our results suggest that ZipA and FtsA* may contribute to constriction by stabilizing this miniring conformation.