Browsing by Author "Zhu, Yunhui"
Results Per Page
Sort Options
Item Open Access FSBS resonances observed in a standard highly nonlinear fiber.(Opt Express, 2011-03-14) Wang, Jing; Zhu, Yunhui; Zhang, Rui; Gauthier, Daniel JForward stimulated Brillouin scattering (FSBS) is observed in a standard 2-km-long highly nonlinear fiber. The frequency of FSBS arising from multiple radially guided acoustic resonances is observed up to gigahertz frequencies. The tight confinement of the light and acoustic field enhances the interaction and results in a large gain coefficient of 34.7 W(-1) at a frequency of 933.8 MHz. We also find that the profile on the anti-Stokes side of the pump beam have lineshapes that are asymmetric, which we show is due to the interference between FSBS and the optical Kerr effect. The measured FSBS resonance linewidths are found to increase linearly with the acoustic frequency. Based on this scaling, we conclude that dominant contribution to the linewidth is from surface damping due to the fiber jacket and structural nonuniformities along the fiber.Item Open Access High-fidelity, broadband stimulated-Brillouin-scattering-based slow light using fast noise modulation.(Opt Express, 2011-01-17) Zhu, Yunhui; Lee, Myungjun; Neifeld, Mark A; Gauthier, Daniel JWe demonstrate a 5-GHz-broadband tunable slow-light device based on stimulated Brillouin scattering in a standard highly-nonlinear optical fiber pumped by a noise-current-modulated laser beam. The noisemodulation waveform uses an optimized pseudo-random distribution of the laser drive voltage to obtain an optimal flat-topped gain profile, which minimizes the pulse distortion and maximizes pulse delay for a given pump power. In comparison with a previous slow-modulation method, eye-diagram and signal-to-noise ratio (SNR) analysis show that this broadband slow-light technique significantly increases the fidelity of a delayed data sequence, while maintaining the delay performance. A fractional delay of 0.81 with a SNR of 5.2 is achieved at the pump power of 350 mW using a 2-km-long highly nonlinear fiber with the fast noise-modulation method, demonstrating a 50% increase in eye-opening and a 36% increase in SNR in the comparison.Item Open Access Slow light with a swept-frequency source.(Opt Express, 2010-12-20) Zhang, Rui; Zhu, Yunhui; Wang, Jing; Gauthier, Daniel Jct: We introduce a new concept for stimulated-Brillouin-scattering-based slow light in optical fibers that is applicable for broadly-tunable frequency-swept sources. It allows slow light to be achieved, in principle, over the entire transparency window of the optical fiber. We demonstrate a slow light delay of 10 ns at 1.55 μm using a 10-m-long photonic crystal fiber with a source sweep rate of 400 MHz/μs and a pump power of 200 mW. We also show that there exists a maximal delay obtainable by this method, which is set by the SBS threshold, independent of sweep rate. For our fiber with optimum length, this maximum delay is ~38 ns, obtained for a pump power of 760 mW.Item Open Access Theory and Application of SBS-based Group Velocity Manipulation in Optical Fibers(2013) Zhu, YunhuiAll-optical devices have attracted many research interests due to their ultimately low heat dissipation compared to conventional devices based on electric-optical conversion. With recent advances in nonlinear optics, it is now possible to design the optical properties of a medium via all-optical nonlinear effects in a table-top device or even on a chip.
In this thesis, I realize all-optical control of the optical group velocity using the nonlinear process of stimulated Brillouin scattering (SBS) in optical fibers. The SBS-based techniques generally require very low pump power and offer a wide transparent window and a large tunable range. Moreover, my invention of the arbitrary SBS resonance tailoring technique enables engineering of the optical properties to optimize desired function performance,
which has made the SBS techniques particularly widely adapted for
various applications.
I demonstrate theoretically and experimentally how the all-optical
control of group velocity is achieved using SBS in optical fibers.
Particularly, I demonstrate that the frequency dependence of the
wavevector experienced by the signal beam can be tailored using
multi-line and broadband pump beams in the SBS process. Based on the theoretical framework, I engineer the spectral profile
to achieve two different application goals: a uniform low group velocity (slow light) within a broadband spectrum, and a group velocity with a linear dependence on the frequency detuning (group velocity dispersion or GVD).
In the broadband SBS slow light experiment, I develop a novel noise current modulation method that arbitrarily tailors the spectrum of a diode laser. Applying this method, I obtain a 5-GHz broadband SBS gain with optimized flat-topped profile, in comparison to the ~40 MHz natural linewidth of the SBS resonance. Based on the broadband SBS resonance, I build a 5-GHz optical buffer and use this optical buffer to delay a return-to-zero data sequence of rate 2.5 GHz (pulse width 200 ps). The fast noise modulation method significantly stabilizes the SBS gain and improves the signal fidelity. I obtain a tunable delay up to one pulse-width with a peak signal-to-noise ratio of 7. I also find that SBS slow light performance can be improved by avoiding competing nonlinear effects. A gain-bandwidth product of 344 dB.GHz is obtained in our system with a highly-nonlinear optical fiber.
Besides the slow light applications, I realize that group velocity dispersion is also optically controlled via the SBS process. In the very recent GVD experiment, I use a dual-line SBS resonance and obtain a tunable GVD parameter of 7.5 ns$^2$/m, which is 10$^9$ times larger than the value found in a single-mode fiber. The large GVD system is used to disperse an optical pulse with a pulse width of 28 ns, which is beyond the capability for current dispersion techniques working in the picosecond and sub picosecond region. The SBS-based all-optical control of GVD is also widely tunable and can
be applied to any wavelength within the transparent window of the
optical fiber. I expect many future extensions following this work
on the SBS-based all-optical GVD control using the readily developed SBS tailoring techniques.
Finally, I extend the basic theory of backwards SBS to describe the forward SBS observed in a highly nonlinear fiber, where asymmetric forward SBS resonances are observed at the gigahertz range. An especially large gain coefficient of 34.7 W$^{-1}$ is observed at the resonance frequency of 933.8 MHz. This is due to good overlap between the optical wave and the high order guided radial acoustic wave. The interplay from the competing process known as the Kerr effect is also accounted for in the theory.