Browsing by Subject "Anthropology, Physical"

Now showing 1 - 8 of 8
  • Thumbnail Image
    ItemOpen Access
    Body temperature and thermal environment in a generalized arboreal anthropoid, wild mantled howling monkeys (Alouatta palliata).
    (Am J Phys Anthropol, 2014-05) Thompson, Cynthia L; Williams, Susan H; Glander, Kenneth E; Teaford, Mark F; Vinyard, Christopher J
    Free-ranging primates are confronted with the challenge of maintaining an optimal range of body temperatures within a thermally dynamic environment that changes daily, seasonally, and annually. While many laboratory studies have been conducted on primate thermoregulation, we know comparatively little about the thermal pressures primates face in their natural, evolutionarily relevant environment. Such knowledge is critical to understanding the evolution of thermal adaptations in primates and for comparative evaluation of humans' unique thermal adaptations. We examined temperature and thermal environment in free-ranging, mantled howling monkeys (Alouatta palliata) in a tropical dry forest in Guanacaste, Costa Rica. We recorded subcutaneous (Tsc ) and near-animal ambient temperatures (Ta ) from 11 animals over 1586.5 sample hours during wet and dry seasons. Howlers displayed considerable variation in Tsc , which was largely attributable to circadian effects. Despite significant seasonal changes in the ambient thermal environment, howlers showed relatively little evidence for seasonal changes in Tsc . Howlers experienced warm thermal conditions which led to body cooling relative to the environment, and plateaus in Tsc at increasingly warm Ta . They also frequently faced cool thermal conditions (Ta  < Tsc ) in which Tsc was markedly elevated compared with Ta . These data add to a growing body of evidence that non-human primates have more labile body temperatures than humans. Our data additionally support a hypothesis that, despite inhabiting a dry tropical environment, howling monkeys experience both warm and cool thermal pressures. This suggests that thermal challenges may be more prevalent for primates than previously thought, even for species living in nonextreme thermal environments.
  • Thumbnail Image
    ItemOpen Access
    Dust in the wind: How climate variables and volcanic dust affect rates of tooth wear in Central American howling monkeys.
    (Am J Phys Anthropol, 2016-02) Spradley, Jackson P; Glander, Kenneth E; Kay, Richard F
    OBJECTIVES: Two factors have been considered important contributors to tooth wear: dietary abrasives in plant foods themselves and mineral particles adhering to ingested food. Each factor limits the functional life of teeth. Cross-population studies of wear rates in a single species living in different habitats may point to the relative contributions of each factor. MATERIALS AND METHODS: We examine macroscopic dental wear in populations of Alouatta palliata (Gray, 1849) from Costa Rica (115 specimens), Panama (19), and Nicaragua (56). The sites differ in mean annual precipitation, with the Panamanian sites receiving more than twice the precipitation of those in Costa Rica or Nicaragua (∼3,500 mm vs. ∼1,500 mm). Additionally, many of the Nicaraguan specimens were collected downwind of active plinian volcanoes. Molar wear is expressed as the ratio of exposed dentin area to tooth area; premolar wear was scored using a ranking system. RESULTS: Despite substantial variation in environmental variables and the added presence of ash in some environments, molar wear rates do not differ significantly among the populations. Premolar wear, however, is greater in individuals collected downwind from active volcanoes compared with those living in environments that did not experience ash-fall. DISCUSSION: Volcanic ash seems to be an important contributor to anterior tooth wear but less so in molar wear. That wear is not found uniformly across the tooth row may be related to malformation in the premolars due to fluorosis. A surge of fluoride accompanying the volcanic ash may differentially affect the premolars as the molars fully mineralize early in the life of Alouatta.
  • Thumbnail Image
    ItemOpen Access
    Evolution of postural diversity in primates as reflected by the size and shape of the medial tibial facet of the talus.
    (American journal of physical anthropology, 2015-05) Boyer, Doug M; Yapuncich, Gabriel S; Butler, Jared E; Dunn, Rachel H; Seiffert, Erik R
    Comprehensive quantification of the shape and proportions of the medial tibial facet (MTF) of the talus (=astragalus) has been lacking for Primates and their closest relatives. In this study, aspects of MTF form were quantified and employed to test hypotheses about their functional and phylogenetic significance. The following hypotheses influence perceptions of primate evolutionary history but are due for more rigorous assessment: 1) A relatively large MTF distinguishes "prosimians" (strepsirrhines and tarsiers) from anthropoids and non-primate euarchontans; 2) the distinctive form of the "prosimian" MTF is a correlate of locomotor tendencies that emphasize use of vertical and small diameter supports in conjunction with inverted, abducted foot postures; and 3) the "prosimian" MTF form arose along the primate stem lineage and was present in the euprimate common ancestor.Three-dimensional (3D) scanning was used to create scale digital models of tali (n = 378 specimens, 122 species) from which three types of variables capturing aspects of MTF form were computed: 1) MTF area relative to body mass and ectal facet area; 2) MTF shape (elliptical vs. non-elliptical); and 3) MTF dorsal restriction on the talar body (i.e., extensive vs. minimal exposure of non-articular area). Data were analyzed using both phylogenetic and traditional comparative methods including Phylogenetic Generalized Least Squares, Ordinary Least Squares, ANCOVA, ANOVA, and Bayesian Ancestral State Reconstruction (ASR).Extant "prosimians" are generally distinct from anthropoids and non-primate euarchontans in our quantitative representations of MTF form. MTF area (but not shape or dorsal restriction) correlates with fibular facet angle (FFa) of the talus, which has also been argued to reflect habitual pedal inversion. Among strepsirrhines, taxa that engage in grasp-leaping more frequently/effectively appear to have a relatively larger MTF than less acrobatic taxa. Directional models of evolutionary change better describe the phylogenetic distribution of MTF variation than do other models. ASR shows 1) little change in the MTF along the primate stem, 2) independent evolution of relatively large and dorsoplantarly deep MTFs in basal haplorhines and strepsirrhines, and 3) re-evolution of morphologies similar to non-euprimates in anthropoids.Results support the hypothesis that differences in MTF form between anthropoids and "prosimians" reflect greater use of inverted foot postures and grasp-leaping in the latter group. Although fossil "prosimians" do not have the extreme MTF dimensions that characterize many extant acrobatic leapers, these variables by themselves provide little additional behavioral resolution at the level of individual fossils due to strong phylogenetic signal. ASR suggests that some specialization for use of inverted foot postures (as required in a fine-branch niche) and modifications for grasp-leaping evolved independently in basal strepsirrhine and haplorhine lineages.
  • Thumbnail Image
    ItemOpen Access
    Intraspecific variation in semicircular canal morphology-A missing element in adaptive scenarios?
    (American journal of physical anthropology, 2019-01) Gonzales, Lauren A; Malinzak, Michael D; Kay, Richard F
    OBJECTIVES:Recent evidence suggests that the amount of intraspecific variation in semicircular canal morphology may, itself, be evidence for varying levels of selection related to locomotor demands. To determine the extent of this phenomenon across taxa, we expand upon previous work by examining intraspecific variation in canal radii and canal orthogonality in a broad sample of strepsirrhine and platyrrhine primates. Patterns of interspecific variation are re-examined in light of intraspecific variation to better understand the resolution at which locomotion can be reconstructed from single individuals. MATERIALS AND METHODS:Data was collected from high-resolution CT scans of 14 size-matched, related species. Six of these taxa have existing data on rotational head speeds. RESULTS:The level of intraspecific variation was found to differ in strepsirrhine and in platyrrhine species pairs, with larger ranges of variation generally observed for the slower moving taxon than the faster moving one. Taxa that are classified as relatively agile can to some extent be separated from those who are slower-moving, but only when comparing similarly sized, closely related species with more extreme forms of locomotion. DISCUSSION:Our findings agree with previous research showing that canal intraspecific variation can fluctuate according to species-specific locomotor behavior and extends this further by identifying behaviors that may be under unusual selective pressure. It also demonstrates the complexity of interpreting inner ear morphology in the context of broadly applicable locomotor "categories" of the kind commonly used in behavioral studies. We suspect that simplified models predicting vestibular sensitivity may be unable to differentiate behaviors when only a single specimen is available.
  • Thumbnail Image
    ItemOpen Access
    Predicting euarchontan body mass: A comparison of tarsal and dental variables.
    (American journal of physical anthropology, 2015-07) Yapuncich, Gabriel S; Gladman, Justin T; Boyer, Doug M
    Multiple meaningful ecological characterizations of a species revolve around body mass. Because body mass cannot be directly measured in extinct taxa, reliable body mass predictors are needed. Many published body mass prediction equations rely on dental dimensions, but certain skeletal dimensions may have a more direct and consistent relationship with body mass. We seek to evaluate the reliability of prediction equations for inferring euarchontan body mass based on measurements of the articular facet areas of the astragalus and calcaneus.Surface areas of five astragalar facets (n = 217 specimens) and two calcaneal facets (n = 163) were measured. Separate ordinary least squares and multiple regression equations are presented for different levels of taxonomic inclusivity, and the reliability of each equation is evaluated with the coefficient of determination, standard error of the estimate, mean prediction error, and the prediction sum of squares statistic. We compare prediction errors to published prediction equations that utilize dental and/or tarsal measures. Finally, we examine the effects of taxonomically specific regressions and apply our equations to a diverse set of non-primates.Our results reveal that predictions based on facet areas are more reliable than most linear dental or tarsal predictors. Multivariate approaches are often better than univariate methods, but require more information (making them less useful for fragmentary fossils). While some taxonomically specific regressions improve predictive ability, this is not true for all primate groups.Among individual facets, the ectal and fibular facets of the astragalus and the calcaneal cuboid facet are the best body mass predictors. Since these facets have primarily concave curvature and scale with positive allometry relative to body mass, it appears that candidate skeletal proxies for body mass can be identified based on their curvature and scaling coefficients.
  • Thumbnail Image
    ItemOpen Access
    Smooth operator: The effects of different 3D mesh retriangulation protocols on the computation of Dirichlet normal energy.
    (American journal of physical anthropology, 2017-05) Spradley, Jackson P; Pampush, James D; Morse, Paul E; Kay, Richard F
    Dirichlet normal energy (DNE) is a metric of surface topography that has been used to evaluate the relationship between the surface complexity of primate cheek teeth and dietary categories. This study examines the effects of different 3D mesh retriangulation protocols on DNE. We examine how different protocols influence the DNE of a simple geometric shape-a hemisphere-to gain a more thorough understanding than can be achieved by investigating a complex biological surface such as a tooth crown.We calculate DNE on 3D surface meshes of hemispheres and on primate molars subjected to various retriangulation protocols, including smoothing algorithms, smoothing amounts, target face counts, and criteria for boundary face exclusion. Software used includes R, MorphoTester, Avizo, and MeshLab. DNE was calculated using the R package "molaR."In all cases, smoothing as performed in Avizo sharply decreases DNE initially, after which DNE becomes stable. Using a broader boundary exclusion criterion or performing additional smoothing (using "mesh fairing" methods) further decreases DNE. Increasing the mesh face count also results in increased DNE on tooth surfaces.Different retriangulation protocols yield different DNE values for the same surfaces, and should not be combined in meta-analyses. Increasing face count will capture surface microfeatures, but at the expense of computational speed. More aggressive smoothing is more likely to alter the essential geometry of the surface. A protocol is proposed that limits potential artifacts created during surface production while preserving pertinent features on the occlusal surface.
  • No Thumbnail Available
    ItemOpen Access
    The effect of differences in methodology among some recent applications of shearing quotients.
    (Am J Phys Anthropol, 2015-01) Boyer, Doug M; Winchester, Julia; Kay, Richard F
    A shearing quotient (SQ) is a way of quantitatively representing the Phase I shearing edges on a molar tooth. Ordinary or phylogenetic least squares regression is fit to data on log molar length (independent variable) and log sum of measured shearing crests (dependent variable). The derived linear equation is used to generate an 'expected' shearing crest length from molar length of included individuals or taxa. Following conversion of all variables to real space, the expected value is subtracted from the observed value for each individual or taxon. The result is then divided by the expected value and multiplied by 100. SQs have long been the metric of choice for assessing dietary adaptations in fossil primates. Not all studies using SQ have used the same tooth position or crests, nor have all computed regression equations using the same approach. Here we focus on re-analyzing the data of one recent study to investigate the magnitude of effects of variation in 1) shearing crest inclusion, and 2) details of the regression setup. We assess the significance of these effects by the degree to which they improve or degrade the association between computed SQs and diet categories. Though altering regression parameters for SQ calculation has a visible effect on plots, numerous iterations of statistical analyses vary surprisingly little in the success of the resulting variables for assigning taxa to dietary preference. This is promising for the comparability of patterns (if not casewise values) in SQ between studies. We suggest that differences in apparent dietary fidelity of recent studies are attributable principally to tooth position examined.
  • Thumbnail Image
    ItemOpen Access
    The effect of high wear diets on the relative pulp volume of the lower molars.
    (American journal of physical anthropology, 2021-04) Selig, Keegan R; Kupczik, Kornelius; Silcox, Mary T

    Objectives

    One role of dental pulp is in the upkeep and maintenance of dentine. Under wear, odontoblasts in the pulp deposit tertiary dentine to ensure the sensitive internal dental tissues are not exposed and vulnerable to infection. It follows that there may be an adaptive advantage for increasing molar pulp volume in anthropoid primate taxa that are prone to high levels of wear. The relative volume of dental pulp is therefore predicted to covary with dietary abrasiveness (in the sense of including foods that cause high degrees of wear).

    Materials and methods

    We examined relatively unworn lower second molars in pairs of species of extant hominoids, cebids, and pitheciids that vary in the abrasiveness of their diet (n = 36). Using micro-CT scans, we measured the percent of tooth that is pulp (PTP) as the ratio of pulp volume to that of the total volume of the tooth.

    Results

    We found that in each pair of species, the taxa that consume a more abrasive diet had a significantly higher PTP than the closely related taxa that consume a softer diet.

    Conclusions

    Our results point to an adaptive mechanism in the molars of taxa that consume abrasive diets and are thus subject to higher levels of wear. Our results provide additional understanding of the relationship between dental pulp and diet and may offer insight into the diet of extinct taxa such as Paranthropus boisei or into the adaptive context of the taurodont molars of Neanderthals.