An algorithm for combining electrical mobility and aerodynamic size distributions data when measuring ambient aerosol

Loading...
Thumbnail Image

Date

2004

Journal Title

Journal ISSN

Volume Title

Repository Usage Stats

195
views
349
downloads

Abstract

Ambient aerosol particles vary in size from a few nanometers to several micrometers. No instrument is currently available to cover such a wide size range, and so a combination of several instruments is usually used. One such combination is that of electrical mobility classifiers and an aerodynamic sizer. Because of the differences in measurement principles between the instruments, difficulties arise in the combination of the measurements into a single size distribution. Here we report a simple algorithm that was developed to combine aerosol size distributions measured with commercially available scanning mobility particle sizers (SNIPS; TSI Inc.) and an aerodynamic particle sizer (APS; TSI Inc.). This algorithm was tested during July 2001 in the Pittsburgh Air Quality Study. The aerosol during the study had both urban and regional origin and is characteristic of urban atmosphere in the Northeastern U.S. The integrated volume concentrations from the SMPS-APS showed a good correlation with PM2.5 mass concentration measurements using a TEOM. The relation of the aerosol mass to its volume is an ``effective{''} density, a ratio of the bulk aerosol density to the shape factor. As a result of the comparison with the TEOM the ambient aerosol in the Pittsburgh area was found to have an effective density of 1.5 +/- 0.3 g cm(-3). Given that the aerosol during the study was found to always contain water, the particles are expected to be spherical and thus the shape factor may be assumed to be 1. This assumption has been supported by a comparison with the MOUDI, using the aerosol density of 1.5 g/cm(3). It should be noted that the estimated aerosol density and the shape factor are applicable to this study only and may be different in other locations.

Department

Description

Provenance

Subjects

Citation


Unless otherwise indicated, scholarly articles published by Duke faculty members are made available here with a CC-BY-NC (Creative Commons Attribution Non-Commercial) license, as enabled by the Duke Open Access Policy. If you wish to use the materials in ways not already permitted under CC-BY-NC, please consult the copyright owner. Other materials are made available here through the author’s grant of a non-exclusive license to make their work openly accessible.